An Efficient Agrobacterium-Mediated Transformation Method for Hybrid Poplar 84K (Populus alba × P. glandulosa) Using Calli as Explants.

A highly efficient Agrobacterium-mediated transformation method is needed for the molecular study of model tree species such as hybrid poplar 84K (Populus alba × P. glandulosa cv. '84K'). In this study, we report a callus-based transformation method that exhibits high efficiency and reproducibility. The optimized callus induction medium (CIM1) induced the development of calli from leaves with high efficiency, and multiple shoots were induced from calli growing on the optimized shoot induction medium (SIM1). Factors affecting the transformation frequency of calli were optimized as follows: Agrobacterium concentration sets at an OD600 of 0.6, Agrobacterium infective suspension with an acetosyringone (AS) concentration of 100 µM, infection time of 15 min, cocultivation duration of 2 days and precultivation duration of 6 days. Using this method, transgenic plants are obtained within approximately 2 months with a transformation frequency greater than 50%. Polymerase chain reaction (PCR), reverse transcription-PCR (RT-PCR) and ß-galactosidase (GUS) histochemical staining analyses confirmed the successful generation of stable transformants. Additionally, the calli from leaves were subcultured and used to obtain new explants; the high transformation efficiency was still maintained in subcultured calli after 6 cycles. This method provides a reference for developing effective transformation protocols for other poplar species.

A novel AST2 mutation generated upon whole-genome transformation of Saccharomyces cerevisiae confers high tolerance to 5-Hydroxymethylfurfural (HMF) and other inhibitors.

Development of cell factories for conversion of lignocellulosic biomass hydrolysates into biofuels or bio-based chemicals faces major challenges, including the presence of inhibitory chemicals derived from biomass hydrolysis or pretreatment. Extensive screening of 2526 Saccharomyces cerevisiae strains and 17 non-conventional yeast species identified a Candida glabrata strain as the most 5-hydroxymethylfurfural (HMF) tolerant. Whole-genome (WG) transformation of the second-generation industrial S. cerevisiae strain MD4 with genomic DNA from C. glabrata, but not from non-tolerant strains, allowed selection of stable transformants in the presence of HMF. Transformant GVM0 showed the highest HMF tolerance for growth on plates and in small-scale fermentations. Comparison of the WG sequence of MD4 and GVM1, a diploid segregant of GVM0 with similarly high HMF tolerance, surprisingly revealed only nine non-synonymous SNPs, of which none were present in the C. glabrata genome. Reciprocal hemizygosity analysis in diploid strain GVM1 revealed AST2N406I as the only causative mutation. This novel SNP improved tolerance to HMF, furfural and other inhibitors, when introduced in different yeast genetic backgrounds and both in synthetic media and lignocellulose hydrolysates. It stimulated disappearance of HMF and furfural from the medium and enhanced in vitro furfural NADH-dependent reducing activity. The corresponding mutation present in AST1 (i.e. AST1D405I) the paralog gene of AST2, also improved inhibitor tolerance but only in combination with AST2N406I and in presence of high inhibitor concentrations. Our work provides a powerful genetic tool to improve yeast inhibitor tolerance in lignocellulosic biomass hydrolysates and other inhibitor-rich industrial media, and it has revealed for the first time a clear function for Ast2 and Ast1 in inhibitor tolerance.

Pursuit of chlorovirus genetic transformation and CRISPR/Cas9-mediated gene editing.

Genetic and molecular modifications of the large dsDNA chloroviruses, with genomes of 290 to 370 kb, would expedite studies to elucidate the functions of both identified and unidentified virus-encoded proteins. These plaque-forming viruses replicate in certain unicellular, eukaryotic chlorella-like green algae. However, to date, only a few of these algal species and virtually none of their viruses have been genetically manipulated due to lack of practical methods for genetic transformation and genome editing. Attempts at using Agrobacterium-mediated transfection of chlorovirus host Chlorella variabilis NC64A with a specially-designed binary vector resulted in successful transgenic cell selection based on expression of a hygromycin-resistance gene, initial expression of a green fluorescence gene and demonstration of integration of Agrobacterium T-DNA. However, expression of the integrated genes was soon lost. To develop gene editing tools for modifying specific chlorovirus CA-4B genes using preassembled Cas9 protein-sgRNA ribonucleoproteins (RNPs), we tested multiple methods for delivery of Cas9/sgRNA RNP complexes into infected cells including cell wall-degrading enzymes, electroporation, silicon carbide (SiC) whiskers, and cell-penetrating peptides (CPPs). In one experiment two independent virus mutants were isolated from macerozyme-treated NC64A cells incubated with Cas9/sgRNA RNPs targeting virus CA-4B-encoded gene 034r, which encodes a glycosyltransferase. Analysis of DNA sequences from the two mutant viruses showed highly targeted nucleotide sequence modifications in the 034r gene of each virus that were fully consistent with Cas9/RNP-directed gene editing. However, in ten subsequent experiments, we were unable to duplicate these results and therefore unable to achieve a reliable system to genetically edit chloroviruses. Nonetheless, these observations provide strong initial suggestions that Cas9/RNPs may function to promote editing of the chlorovirus genome, and that further experimentation is warranted and worthwhile.

Genetic transformation and growth index determination of the Larix olgensis LoHDZ2 transcription factor gene in tobacco.

Homeodomain-leucine zippers (HD-Zip) are plant-specific transcription factors that participate in different plant development processes and differentially regulate metabolic processes. LoHDZ2 is an HD-ZipII subfamily transcription factor gene that we identified from a transcriptomic analysis of Larix olgensis. To understand its function, we built a LoHDZ2 expression vector and then inserted it into tobacco by genetic transformation. Transgenic plants were identified at the DNA and RNA levels. Phenotypic index analysis of transgenic tobacco showed dwarfed growth with larger leaves and earlier flowering than the wild type. LoHDZ2 was expressed differently after hormone treatment with IAA, MeJA and 2,4-D. The results suggested that LoHDZ2 may respond to hormones and be involved in regulating growth and metabolism. These results helped us better understand the function of LoHDZ2 and provided a candidate gene for Larix olgensis molecular breeding.

Abietane Diterpenoids from the Hairy Roots of Salvia corrugata.

Salvia corrugata Vahl. is an interesting source of abietane and abeo-abietane compounds that showed antibacterial, antitumor, and cytotoxic activities. The aim of the study was to obtain transformed roots of S. corrugata and to evaluate the production of terpenoids in comparison with in vivo root production. Hairy roots were initiated from leaf explants by infection with ATCC 15834 Agrobacterium rhizogenes onto hormone-free Murashige and Skoog (MS) solid medium. Transformation was confirmed by polymerase chain reaction analysis of rolC and virC1 genes. The biomass production was obtained in hormone-free liquid MS medium using Temporary Immersion System bioreactor RITA®. The chromatographic separation of the methanolic extract of the untransformed roots afforded horminone, ferruginol, 7-O-acetylhorminone and 7-O-methylhorminone. Agastol and ferruginol were isolated and quantified from the hairy roots. The amount of these metabolites indicated that the hairy roots of S. corrugata can be considered a source of these compounds.

Efficient genetic transformation method for Eucalyptus genome editing.

Plantation forestry of Eucalyptus urophylla × Eucalyptus grandis supplies high-quality raw material for pulp, paper, wood, and energy and thereby reduces the pressures on native forests and their associated biodiversity. Nevertheless, owing to the heterozygosity of the E. urophylla × E. grandis genetic background, germplasm improvement by crossbreeding tends to be inefficient. As an alternative approach, genetic engineering of Eucalyptus can be used to effectively improve germplasm resources. From a strategic standpoint, increasing the plantation productivity and wood quality by transgenic technology has become increasingly important for forest industry. In this study, we established a fluorescence labelling method using CRISPR/Cas9 technology to obtain positive transformed progenies. The positive transformed progenies were easily obtained from the genetically modified population via fluorescence screening. This system can be used as a plant genome site-specific editing tool and may be useful for improving Eucalyptus genetic resources.

High-Efficiency Electroporation for Genetic Improvement of Fungal Strains.

Electroporation is a method for the introduction of molecules (usually nucleic acids) into a cell, consisting of submitting the cells to high-voltage and short electric pulses in the presence of the exogenous DNA/molecule. It is a versatile method, adaptable to different types of cells, from bacteria to cultured cells to higher eukaryotes, and thus has applications in many diverse fields, such as environmental biology, biotechnology, genetic engineering, and medicine. Electroporation has some advantages over other genetic transformation strategies, including the simplicity of the method, a wide range of adjustable parameters (possibility of optimization), high reproducibility and avoidance of the use of chemicals toxic to cells. Here we describe an optimized electroporation procedure for the industrially important fungus Acremonium chrysogenum, using germinated conidia and fragmented young mycelium. In both cases, the transformation efficiency was higher compared to the conventional polyethylene glycol (PEG)-mediated transformation of protoplasts.

Genetic Transformation of Trichoderma spp.

The production of biofuels from plant biomass is dependent on the availability of enzymes that can hydrolyze the plant cell wall polysaccharides to their monosaccharides. These enzyme mixtures are formed by microorganisms but their native compositions and properties are often not ideal for application. Genetic engineering of these microorganisms is therefore necessary, in which introduction of DNA is an essential precondition. The filamentous fungus Trichoderma reesei-the main producer of plant-cell-wall-degrading enzymes for biofuels and other industries-has been subjected to intensive genetic engineering toward this goal and has become one of the iconic examples of the successful genetic improvement of fungi. However, the genetic manipulation of other enzyme-producing Trichoderma species is frequently less efficient and, therefore, rarely managed. In this chapter, we therefore describe the two potent methods of Trichoderma transformation mediated by either (a) polyethylene glycol (PEG) or (b) Agrobacterium. The methods are optimized for T. reesei but can also be applied for such transformation-resilient species as T. harzianum and T. guizhouense, which are putative upcoming alternatives for T. reesei in this field. The protocols are simple, do not require extensive training or special equipment, and can be further adjusted for T. reesei mutants with particular properties.

Optimization of Micropropagation and Genetic Transformation Protocols for Paulownia elongata : A Short Rotation Fast Growing Bioenergy Tree.

Various steps of micropropagation include selection of suitable explant, establishment of adventitious shoot induction cultures, proliferation, rooting, and acclimatization of the resulting plantlets. A systematic protocol is provided for the micropropagation and Agrobacterium tumefaciens-mediated genetic transformation of a fast growing, multipurpose tree, Paulownia elongata. Our studies show that optimum shoot induction is on half leaf with petiole explant on MS medium supplemented with 25 µM thidiazuron and 10 µM indole-3 acetic acid. Micropropagation protocols provided here are applicable to explants collected from the primed in vitro raised seedlings on MS medium containing 2.5 µM 6-benzylaminopurine (BAP) or actively growing shoots collected from greenhouse or field growing plants. We also discuss a possible role of "Python" script guided protocol optimization for higher and consistent multiplication of shoots that can be very helpful for scaled up production in commercial settings. To facilitate future plant improvement and gene editing possibilities, an A. tumefaciens based genetic transformation protocol and molecular identification of transgenic plants using Polymerase Chain Reaction (PCR) and Reverse Transcriptase-PCR (RT-PCR) techniques have also been optimized.

Olive (Olea europaea L.) Genetic Transformation: Current Status and Future Prospects.

Olive (Olea europaea L.) is the most characteristic and important oil crop of the Mediterranean region. Traditional olive cultivation is based on few tens cultivars of ancient origin. To improve this crop, novel selections with higher tolerance to biotic and abiotic stress, adaptable to high-density planting systems and resilient to climate change are needed; however, breeding programs are hindered by the long juvenile period of this species and few improved genotypes have been released so far. Genetic transformation could be of great value, in the near future, to develop new varieties or rootstocks in a shorter time; in addition, it has currently become an essential tool for functional genomic studies. The recalcitrance of olive tissues to their in vitro manipulation has been the main bottleneck in the development of genetic transformation procedures in this species; however, some important traits such as fungal resistance, flowering or lipid composition have successfully been manipulated through the genetic transformation of somatic embryos of juvenile or adult origin, providing a proof of the potential role that this technology could have in olive improvement. However, the optimization of these protocols for explants of adult origin is a prerequisite to obtain useful materials for the olive industry. In this review, initially, factors affecting plant regeneration via somatic embryogenesis are discussed. Subsequently, the different transformation approaches explored in olive are reviewed. Finally, transgenic experiments with genes of interest undertaken to manipulate selected traits are discussed.

An Optimized Transformation System and Functional Test of CYC-Like TCP Gene CpCYC in Chirita pumila (Gesneriaceae).

The development of an ideal model plant located at a key phylogenetic node is critically important to advance functional and regulatory studies of key regulatory genes in the evolutionary developmental (evo-devo) biology field. In this study, we selected Chirita pumila in the family Gesneriaceae, a basal group in Lamiales, as a model plant to optimize its genetic transformation system established previously by us through investigating a series of factors and further conduct functional test of the CYC-like floral symmetry gene CpCYC. By transforming a RNAi:CpCYC vector, we successfully achieved the desired phenotypes of upright actinomorphic flowers, which suggest that CpCYC actually determines the establishment of floral zygomorphy and the horizontal orientation of flowers in C. pumila. We also confirmed the activities of CpCYC promoter in dorsal petals, dorsal/lateral staminodes, as well as the pedicel by transferring a CpCYC promoter:GUS vector into C. pumila. Furthermore, we testified the availability of a transient gene expression system using C. pumila mesophyll protoplasts. The improved transformation system together with the inherent biological features would make C. pumila an attractive new model in functional and regulatory studies for a broad range of evo-devo issues.

Manipulating Pericyte Function with MicroRNAs.

MicroRNAs (miRNAs) are expressed in all cell types, including pericytes, and play essential roles in vascular development, homeostasis, and disease. Manipulation of pericytes with miRNA mimics and inhibitors represents an essential tool to study the role of pericytes in vascular development and regeneration and to better understand the therapeutic potential of miRNA manipulation in pericytes. Here we describe methods for manipulating pericyte function by using miRNA mimics and inhibitors. We also describe methods to assess pericyte function (proliferation and migration) after manipulation with miRNAs and explain how miRNA gene targets can be identified and validated in pericytes after manipulation with miRNA.

Genetic Transformation of Fusobacterium nucleatum.

Fusobacterium nucleatum is a human periodontal pathogen that causes opportunistic infections. It has been implicated in preterm birth and has as a pathogen of colorectal cancer. However, it is a common member of the oral microbiota and can have a symbiotic relationship with its hosts. To date, studies of F. nucleatum have been hindered by a lack of effective genetic tools, and the transformation of F. nucleatum has not been investigated. In this chapter, protocols for the transformation of F. nucleatum strain 12230 using sonoporation are presented. We also include a genetic complementation protocol for a F. nucleatum knockout mutant.

Pheno-RNA, a method to associate genes with a specific phenotype, identifies genes linked to cellular transformation.

Cellular transformation is associated with dramatic changes in gene expression, but it is difficult to determine which regulated genes are oncogenically relevant. Here we describe Pheno-RNA, a general approach to identifying candidate genes associated with a specific phenotype. Specifically, we generate a "phenotypic series" by treating a nontransformed breast cell line with a wide variety of molecules that induce cellular transformation to various extents. By performing transcriptional profiling across this phenotypic series, the expression profile of every gene can be correlated with the strength of the transformed phenotype. We identify ∼200 genes whose expression profiles are very highly correlated with the transformation phenotype, strongly suggesting their importance in transformation. Within biological categories linked to cancer, some genes show high correlations with the transformed phenotype, but others do not. Many genes whose expression profiles are highly correlated with transformation have never been associated with cancer, suggesting the involvement of heretofore unknown genes in cancer.

Agrobacterium tumefaciens-Mediated Genetic Transformation of the Ect-endomycorrhizal Fungus Terfezia boudieri.

Mycorrhizal desert truffles such as Terfezia boudieri, Tirmania nivea, and Terfezia claveryi, form mycorrhizal associations with plants of the Cistaceae family. These valued truffles are still collected from the wild and not cultivated under intensive farming due to the lack of basic knowledge about their biology at all levels. Recently, several genomes of desert truffles have been decoded, enabling researchers to attempt genetic manipulations to enable cultivation. To execute such manipulations, the development of molecular tools for genes transformation into truffles is needed. We developed an Agrobacterium tumefaciens-mediated genetic transformation system in T. boudieri. This system was optimized for the developmental stage of the mycelia explants, bacterial optical density, infection and co-cultivation durations, and concentrations of the selection antibiotics. The pFPL-Rh plasmid harboring hph gene conferring hygromycin resistance as a selection marker and the red fluorescent protein gene were used as visual reporters. The optimal conditions were incubation with 200 µM of acetosyringone, attaining a bacterial optical density of 0.3 OD600; transfer time of 45 min; and co-cultivation for 3 days. This is the first report on a transformation system for T. boudieri, and the proposed protocol can be adapted for the transformation of other important desert truffles as well as ectomycorrhizal species.

Dormancy-to-death transition in yeast spores occurs due to gradual loss of gene-expressing ability.

Dormancy is colloquially considered as extending lifespan by being still. Starved yeasts form dormant spores that wake-up (germinate) when nutrients reappear but cannot germinate (die) after some time. What sets their lifespans and how they age are open questions because what processes occur-and by how much-within each dormant spore remains unclear. With single-cell-level measurements, we discovered how dormant yeast spores age and die: spores have a quantifiable gene-expressing ability during dormancy that decreases over days to months until it vanishes, causing death. Specifically, each spore has a different probability of germinating that decreases because its ability to-without nutrients-express genes decreases, as revealed by a synthetic circuit that forces GFP expression during dormancy. Decreasing amounts of molecules required for gene expression-including RNA polymerases-decreases gene-expressing ability which then decreases chances of germinating. Spores gradually lose these molecules because they are produced too slowly compared with their degradations, causing gene-expressing ability to eventually vanish and, thus, death. Our work provides a systems-level view of dormancy-to-death transition.

Agrobacterium-delivered VirE2 interacts with host nucleoporin CG1 to facilitate the nuclear import of VirE2-coated T complex.

Agrobacterium tumefaciens is the causal agent of crown gall disease. The bacterium is capable of transferring a segment of single-stranded DNA (ssDNA) into recipient cells during the transformation process, and it has been widely used as a genetic modification tool for plants and nonplant organisms. Transferred DNA (T-DNA) has been proposed to be escorted by two virulence proteins, VirD2 and VirE2, as a nucleoprotein complex (T-complex) that targets the host nucleus. However, it is not clear how such a proposed large DNA-protein complex is delivered through the host nuclear pore in a natural setting. Here, we studied the natural nuclear import of the Agrobacterium-delivered ssDNA-binding protein VirE2 inside plant cells by using a split-GFP approach with a newly constructed T-DNA-free strain. Our results demonstrate that VirE2 is targeted into the host nucleus in a VirD2- and T-DNA-dependent manner. In contrast with VirD2 that binds to plant importin α for nuclear import, VirE2 directly interacts with the host nuclear pore complex component nucleoporin CG1 to facilitate its nuclear uptake and the transformation process. Our data suggest a cooperative nuclear import model in which T-DNA is guided to the host nuclear pore by VirD2 and passes through the pore with the assistance of interactions between VirE2 and host nucleoporin CG1. We hypothesize that this large linear nucleoprotein complex (T-complex) is targeted to the nucleus by a "head" guide from the VirD2-importin interaction and into the nucleus by a lateral assistance from the VirE2-nucleoporin interaction.

Transformation of a Malaysian species of Nannochloropsis: gateway to construction of transgenic microalgae as vaccine delivery system to aquatic organisms.

NANNOCHLOROPSIS: sp. is a green alga that is widely used in the aquaculture industry as a feed in Malaysia, but genetic engineering studies of this alga are still underexplored even though there is a growing interest in microalgae genetic engineering for various industrial purposes. This study aims to investigate the efficiency of three transformation methods normally done on microalgae, namely polyethylene glycol (PEG), electroporation, and glass beads on Malaysian indigenous Nannochloropsis sp. using two commercially available plasmids, pUC19 and pGEM-T easy vector as well as an amplicon of ampicillin resistance (AMPR) gene. In this study, out of three transformation methods tested, positive transformants of Nannochloropsis sp. were successfully obtained via electroporation method. Further verification via polymerase chain reaction (PCR) and sequencing confirmed that the electroporation method was found to be the sole successful method in producing transgenic lines of our locally isolated Nannochloropsis sp. Results from this study proved the efficiency of electroporation for delivery of transgene to this green alga which has been reported to be tedious. The described method also provides the gateway for developing Nannochloropsis sp. as a delivery system to aquatic organism due to its importance in the industry.

F-Box Gene D5RF Is Regulated by Agrobacterium Virulence Protein VirD5 and Essential for Agrobacterium-Mediated Plant Transformation.

We previously reported that the Agrobacterium virulence protein VirD5 possesses transcriptional activation activity, binds to a specific DNA element D5RE, and is required for Agrobacterium-mediated stable transformation, but not for transient transformation. However, direct evidence for a role of VirD5 in plant transcriptional regulation has been lacking. In this study, we found that the Arabidopsis gene D5RF (coding for VirD5 response F-box protein, At3G49480) is regulated by VirD5. D5RF has two alternative transcripts of 930 bp and 1594 bp that encode F-box proteins of 309 and 449 amino acids, designated as D5RF.1 and D5RF.2, respectively. D5RF.2 has a N-terminal extension of 140 amino acids compared to D5RF.1, and both of them are located in the plant cell nucleus. The promoter of the D5RF.1 contains two D5RE elements and can be activated by VirD5. The expression of D5RF is downregulated when the host plant is infected with virD5 deleted Agrobacterium. Similar to VirD5, D5RF also affects the stable but not transient transformation efficiency of Agrobacterium. Some pathogen-responsive genes are downregulated in the d5rf mutant. In conclusion, this study further confirmed Agrobacterium VirD5 as the plant transcription activator and identified Arabidopsis thalianaD5RF.1 as the first target gene of VirD5 in regulation.

Optimal timing for Agrobacterium-mediated DNA transformation of Trichoderma reesei conidia revealed by live cell imaging.

Trichoderma reesei is the foremost fungal producer of enzymes for industrial processes. Here, we use fluorescent live cell imaging of germinating conidia to improve Agrobacterium tumefaciens-mediated transformation (ATMT) efficiency. We define the timing of (a) morphological changes and (b) nuclear reorganisation during initial conidia germination. This reveals that conidia swell for 7 h, during which nuclei undergo 2 non-synchronised mitotic divisions. Histones are recruited to the nucleus during the first 2 h, suggesting that conidia enter S-phase immediately after activation. This correlates with a significantly increased ATMT efficiency at 2 h after germination initiation. This finding promises to improve genetic manipulation efficiency in T. reesei.